Projects in today’s high-tech world are complicated and fast-paced. There are a lot of hard-working people on board to get the work done with the intent of completing one project and moving on to the next one.

project approval

It’s your job as a project manager to keep the work moving forward…and as much as possible not have it slip backwards for rework, missed requirements, or other reasons that may be out of your control.

To aid in the completion of projects, most companies have created and implemented some form of project lifecycle. The activities that comprise the project lifecycle can be captured using Gantt charts and Gantt chart software.

Whether your company specializes in marketing, web development, or construction projects, there’s a certain path to follow. The path will typically include the following six components:

Requirements — This is where “what” is going to be built is defined

Design — This is where “how” it is going to be built is determined

Build — This is where the “what” and the “how” come together and the work is done

Validate — This is where what was built is confirmed to have been done correctly

Install — This is where the project is implemented in its final location ready for use

Maintain — This is the ongoing maintenance or updates of what was delivered.

Each one of these phases has their own teams of people that are working on deliverables that are specific to each department. These are then passed down the “assembly line” and follow the Gantt chart for the next group to bring their skills to the table and add value to the project along the way.

What is missing from the above list, however, are Approvals or Checkpoints along the way. There is nothing worse or more demoralizing than a project making it all the way to the Installation phase only to hear that “we need to bring this back to the drawing board”.

Your heart sinks as you see the project come to a grinding halt and shift gears to reverse! You watch helplessly as it moves backwards through the validate, build, and design stage just to start over again in the requirements phase.

And then the congressional hearings and finger pointing begins about the project. How could it have made it this far? How was this missed? Who was responsible for approving the work? How much will this cost us to fix? What is the impact on this project’s schedule and others that were coming right behind it?

Approvals and Checkpoints along way would remove all of this angst and should be included in the project schedule and incorporated in the project Gantt chart. Now, congressional hearings and finger-pointing will most likely still ensure, however, you’ll now be able to provide objective, fact-based answers to such questions.

Approvals Instill Accountability

If someone knows they will be responsible for putting their name on the dotted line and approving the work prior to it moving forward, they will pay that much more attention to the quality of the work along the way. They will make sure all the requirements are gathered, the design is sound, the build is solid, and all defects have been found.

They will challenge their team members within their department to do the same and the quality of the output will dramatically increase. Doing so will make the approval process more than just another line item in the Gantt chart software, but an event that really means something.

People Have Short-Term and/or Selective Memories

We’ve all experienced the “drive-by approval”. This is when you are walking in one direction down the hall and someone else is walking the other direction down the hall. “Hey, you good to go with moving the deliverable on to the next phase of the project?” you ask. “You’ve got my blessing”, they reply. You take that as your approval to move forward. Nothing is written down and nothing is documented.

A couple of days pass and this drive-by approval comes back to bite you hard. Something went wrong with the deliverable that moved forward and prompted the obligatory escalation meetings. “I never approved that deliverable to move forward”, they now say. “Of course you did”, you reply, “don’t you remember passing me in the hall and saying you’ve got my blessing?”. To which they reply “I wasn’t giving you approval to move forward, I was just giving you my blessing!”.

Perhaps an extreme example, but you get the point. Unfortunately, I’ve seen it time and time again. Squirrely functional managers will conveniently forget what they approved when the going gets tough.

Or, they will try and spin what they said to the point that they actually meant something else. Not everyone acts this way, but some do and you need to be mindful of the risk this introduces to your project.

How to Keep Your Project Moving Forward

In order to take each and every step forward with confidence, make sure you have the necessary approvals and paperwork in place to not worry about having to go back to the drawing board.

Even if the project does need to go back to the drawing board, you have expended and implemented every bit of due diligence possible on your part as a project manager to make sure it moved forward.

Approvals or Checkpoints don’t need to be a big deal. They are a zero duration task and just a blip on your Gantt chart. It could be a simple Form or a quick Email that states that the project or deliverable has been cleared to move on to the next phase.

It’s just good project management housekeeping to make sure you have the necessary documentation in place with the project deliverables.

Strategically place Approval and Checkpoints throughout your project lifecycle and you will establish traction from your project like never before!

--

--

--

ProductDossier PSA

Recommended from Medium

Data Draw Up: A Workshop to Get Your Team to Love Data

What is a Product Journey Map and How to Build One?

Customer multichannel journey lifecycle

Three Product Management Lessons from a 4 Year Old with a Bee-bot Robot

How to Start a Product Strategy From Scratch With These 5 Steps

Build Your Product Vision with Jira Cards

Two people collaborating on a whiteboard drawing and notes

Product Bugs: A Comprehensive Guide — Part 2

How To Collect Data for Product Management Analytics and Act on It? [Best Tools Included]

Categories-of-KPIs

Do Protocols need Product Management?

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store
Aarav Singh

Aarav Singh

ProductDossier PSA

More from Medium

Entering the orbit: the importance of easing the onboarding process

A marathon is not a sprint

woman holding car steering wheel that is covered in post it notes

Designers, want business leadership to take you seriously? Speak their language.

8 Lessons I’ve Learned to Create OKRs for the Design Team

Design And OKRs